Kenmore Washer F02 Error Code

Slow drain, or a control panel fault on Oasis on Kenmore washers.

F02

Moderate DIY

Two different meanings depending on the family. On 110-series high-efficiency front-loaders, which show it as F/02, the washer is draining slowly, usually because of excess suds or a clogged drain pump filter. On Kenmore Oasis top-loaders, F02 points to the user interface (control panel) board or its wiring.

Compatible models

Kenmore front-load washers with a model number starting 110 (shown as F/02), and Kenmore Oasis top-load washers with a 110 model number.

Also shown as

Sears PartsDirect lists F/02 as a slow drain on 110 high-efficiency front-loaders and F02 as a user interface failure on 110 Oasis top-loaders. Check which type you own before you buy anything.

Difficulty

Start with the safe checks below; a worn part may need replacing.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Kenmore washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Kenmore F02

Rule out suds on a front-loader
If you can see foam through the door, run a Rinse & Spin with no detergent. After that, stick to HE detergent and measure every dose with the cap.
Check the drain path
With the washer unplugged, straighten the drain hose and clear the pump filter if your model has an access point for it. Then run Drain/Spin.
Reset an Oasis top-loader
On an Oasis, unplug the washer for 5 minutes, plug it in and try a cycle. If F02 comes straight back, the problem sits in the control panel or the harness that links it to the main board.

When to call a technician

On a front-loader, a pump that won't clear a clean drain path needs replacing. On an Oasis, a returning F02 calls for a technician to check the harness and the user interface board.

Parts linked to F02

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Kenmore models show the F02 code?

Kenmore front-load washers with a model number starting 110 (shown as F/02), and Kenmore Oasis top-load washers with a 110 model number.

Can I fix Kenmore F02 myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear F02, the cause is likely a worn part that needs replacing.

Other Kenmore washer codes

Last reviewed 2026-10-21. Codes and steps can vary by model; check your owner's manual.

Sources we checked