Guides Search

Home › Kenmore › Washers › F7E1

Kenmore Washer F7E1 Error Code

Basket speed sensor problem on Kenmore washers.

KenmoreAll Kenmore washer codes

F7E1
May need a pro

The control can't read how fast the basket is turning. Sears PartsDirect traces this to the shifter assembly, which carries the speed sensor, or to its wiring, after first ruling out a basket that's binding.

Compatible models

Shown on Kenmore VMW top-load washers in the 110 model range.

Also shown as

F7 E5 on the same family is a shifter position fault, and F7 E7 means the motor can't reach target speed, often because a garment is wedged between the basket and the outer tub.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read Kenmore washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Kenmore F7E1

  1. Check that the basket turns freely

    Unplug the washer, take the clothes out and turn the basket by hand. It should move smoothly without scraping.

  2. Look for a trapped item

    If the basket drags, a sock or small item may be caught under or behind it. Pull out anything you can reach without taking the washer apart.

  3. Reset and test

    Plug the washer in after a few minutes and run a short Drain/Spin with no load.

When to call a technician

If the basket spins freely and F7 E1 keeps returning, the shifter or its wiring needs checking. That means removing panels, so it's a job for a technician.

Parts linked to F7E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Step-by-step guides for this problem

Frequently asked questions

Which Kenmore models show the F7E1 code?

Shown on Kenmore VMW top-load washers in the 110 model range.

Can I fix Kenmore F7E1 myself?

Only the basic checks. You can safely try the steps above, but F7E1 usually points to a part or fault that needs a technician.

Other Kenmore washer codes

Last reviewed 2026-10-21. Codes and steps can vary by model; check your owner's manual.

Sources we checked