Home › Kenmore › Washers › E11
Kenmore Washer E11 Error Code
417 front-loader is taking too long to fill on Kenmore washers.
KenmoreAll Kenmore washer codes
The washer didn't fill in the time it expected. Low water flow is the usual cause: faucets not fully open, frozen or kinked hoses, or clogged inlet screens. A poorly installed drain hose can also siphon water out as it fills.
Compatible models
Kenmore front-load washers with a model number starting 417.
Also shown as
On 417 models without a digital display, count the light flashes to read the code. Other Kenmore families use IE, F20, F/H or F8 E1 for fill problems.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read Kenmore washer codes.
How to fix Kenmore E11
Open the faucets
Turn both faucets fully on and check the house has normal water pressure.
Check hoses and drain hose
Straighten both fill hoses. Then check the drain hose isn't pushed too far down the standpipe or sealed in with tape, which can siphon water away.
Look at the inlet screens
With the water off and the washer unplugged, look at the screens behind the hose connections. Sears PartsDirect advises replacing the inlet valve rather than cleaning clogged screens on this family.
When to call a technician
If flow at the faucets is weak, a plumber is the right call. If flow is strong and the washer still won't fill, the water inlet valve assembly likely needs replacing.
Parts linked to E11
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Step-by-step guides for this problem
- How to Replace Washer Inlet Hoses: Braided vs Rubber Guide
Whirlpool and GE both recommend replacing washer fill hoses every 5 years, sooner if you see bulges, cracks or drips at the couplings.
- Washer Won't Start? 8 Things to Check Before Calling for Service
A washer that won't start usually has one of three simple problems: the control lock is on, the door or lid isn't fully latched, or the Start button wasn't held long enough (Whirlpool says up to 3 seconds on many models).
Frequently asked questions
Which Kenmore models show the E11 code?
Kenmore front-load washers with a model number starting 417.
Can I fix Kenmore E11 myself?
Usually, yes. Most E11 problems clear with simple checks you can do at home. Start with the first step above: open the faucets.
Other Kenmore washer codes
- F21Front-loader didn't drain in time
- F20Front-loader isn't filling
- F02Slow drain, or a control panel fault on Oasis
- F01Main control board fault
- F9E1Top-loader is draining too slowly
- F8E1Top-loader filling slowly or not at all
- F5E2Lid won't lock
- F7E1Basket speed sensor problem
- F0E5Top-loader load is off balance
- IEWater supply problem
- OEFront-loader drains slowly
- UELoad is unbalanced (796 models)
- dEDoor or lid not closed
- LEDrive motor locked or overloaded
- E21417 front-loader drains slowly
- SudToo many suds
- FEToo much water in the tub
Last reviewed 2026-10-21. Codes and steps can vary by model; check your owner's manual.