GE Washer FE Error Code

Water level too high. Here is what it means and how to clear it, easiest fix first.

May need a pro

The washer detected water at a critically high level, which risks an overflow. This usually means the fill valve is not shutting off or the level sensing has failed.

Shown on some GE washers through the Consumer Help Indicator. GE's WSL-series top-loaders show a similar overflow warning as 'OE'.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix GE FE

Shut off water and power
Turn off both water faucets behind the washer right away, then unplug it. If water has reached the outlet or cord, switch off the washer's breaker instead of touching the plug, then mop up.
Keep the washer off until it is serviced
Do not try to run another cycle. Leave the faucets off so the washer cannot keep filling.

When to call a technician

Call for service as soon as this appears; GE directs customers to turn off water and power and schedule a repair.

Parts that commonly cause FE

Water inlet valve
Water level pressure sensor

Order parts by your exact model number so they fit.

Other GE washer codes

Frequently asked questions

What does FE mean on a GE washer?

The washer detected water at a critically high level, which risks an overflow. This usually means the fill valve is not shutting off or the level sensing has failed.

Can I fix GE FE myself?

Only the basic checks. You can safely try the steps above, but FE usually points to a part or fault that needs a technician.

What if FE keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when FE appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

References