Home › Washers › Hotpoint (UK) › F08

Hotpoint (UK) Washer F08 Error Code

Heater fault. Here is what it means and how to clear it, easiest fix first.

F08
May need a pro

The machine has found a problem with its heater, and a wash may stop partway and not carry on.

Applies to UK/European Hotpoint machines only, not GE-made Hotpoint washers sold in the US. Indesit's UK service site lists the same code with the same meaning. Older or different model ranges may use other codes, so go by your handbook and Hotpoint's current list.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Hotpoint (UK) F08

  1. Try one reset

    Switch the machine off and unplug it. If there is water near the outlet or cord, switch off the circuit breaker instead of touching the plug. Wait a couple of minutes, plug it back in and try a cool wash. If it pauses again, stop using the machine.

  2. Note the details for the technician

    Write down the code, the program you were running and the model and serial numbers from the label inside the door. This helps the technician bring the right parts.

When to call a technician

Book a technician to test and, if needed, replace the heating element.

Parts that commonly cause F08

Order parts by your exact model number so they fit.

Other Hotpoint (UK) washer codes

Frequently asked questions

What does F08 mean on a Hotpoint (UK) washer?

The machine has found a problem with its heater, and a wash may stop partway and not carry on.

Can I fix Hotpoint (UK) F08 myself?

Only the basic checks. You can safely try the steps above, but F08 usually points to a part or fault that needs a technician.

What if F08 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when F08 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

References