Home › Washers › Hotpoint (UK) › F06
Hotpoint (UK) Washer F06 Error Code
Door lock fault. Here is what it means and how to clear it, easiest fix first.
The door lock is not working as expected, so the door may not open or lock, and the program will not start even with the door shut. Something may be blocking the latch, or the lock may be faulty. Hotpoint and Indesit have issued a safety recall for the door lock system on certain washing machines.
Applies to UK/European Hotpoint machines only, not GE-made Hotpoint washers sold in the US. Indesit's UK service site lists the same code with the same meaning. Older or different model ranges may use other codes, so go by your handbook and Hotpoint's current list.
How to fix Hotpoint (UK) F06
Check whether your model is recalled
Hotpoint's error-code page notes a safety recall of the door lock system on certain Hotpoint and Indesit washing machines. Find the model and serial numbers on the label inside the door and check them with Hotpoint's recall checker. If your machine is included, stop using it and follow the recall instructions.
Clear the latch area
Switch the machine off and unplug it. If there is water near the outlet or cord, switch off the circuit breaker instead of touching the plug. Open the door if you can, and look for laundry, fluff or anything else caught in the latch or the hole it goes into. Remove it, then close the door firmly until it clicks.
Restart the program
Plug the machine back in and start the program again. Never force the door, tape the lock or try to bypass it.
When to call a technician
If the latch is clear and the code keeps returning, or the door is stuck shut with water inside, book a technician to replace the door lock.
Parts that commonly cause F06
- Door lock (interlock)
- Door handle and hook
Order parts by your exact model number so they fit.
Other Hotpoint (UK) washer codes
- F05Not draining: blocked pump filter or waste hose
- F01Electronic circuit board fault
- F18Internal data error
- F02Motor circuit fault
- F03Temperature sensor fault: not heating
- F07Heating circuit or board fault
- F08Heater fault
- F09Software fault
- F11Drain pump circuit fault
- F12Electronic control fault
- F13Dryer temperature sensor fault (washer dryers)
- F15Heater control fault
- F16Drum position fault (top loaders)
Frequently asked questions
What does F06 mean on a Hotpoint (UK) washer?
The door lock is not working as expected, so the door may not open or lock, and the program will not start even with the door shut. Something may be blocking the latch, or the lock may be faulty. Hotpoint and Indesit have issued a safety recall for the door lock system on certain washing machines.
Can I fix Hotpoint (UK) F06 myself?
Often. The first steps above are safe checks a homeowner can do. If they don't clear F06, the cause is likely a worn part that needs replacing.
What if F06 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when F06 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.