Home › Washers › Hotpoint (UK)

Hotpoint (UK) Washer Error Codes

Find the code shown on your Hotpoint (UK) washing machine and get a plain-English explanation with step-by-step fixes, easiest first. We cover 14 Hotpoint (UK) washer codes, including F05, F06, F01, F18.

All 14 Hotpoint (UK) washer codes

• F05Not draining: blocked pump filter or waste hose
• F06Door lock fault
• F01Electronic circuit board fault
• F18Internal data error
• F02Motor circuit fault
• F03Temperature sensor fault: not heating
• F07Heating circuit or board fault
• F08Heater fault
• F09Software fault
• F11Drain pump circuit fault
• F12Electronic control fault
• F13Dryer temperature sensor fault (washer dryers)
• F15Heater control fault
• F16Drum position fault (top loaders)

About Hotpoint (UK) washer error codes

In the UK and Europe, Hotpoint is a Whirlpool-owned brand, while in the US the Hotpoint name belongs to GE Appliances. The codes on this site refer to UK and European Hotpoint models, which usually show an F followed by a number.

Of the 14 codes on this page, 1 usually have a simple fix you can do yourself, and 12 usually need a technician. Each guide tells you which is which, so you don't pay for a service call you don't need, and you don't attempt a repair that isn't safe.

Before you start

• Write down your model number. It's on a sticker, usually inside the door or lid, on the frame, or on the back or side panel. Parts and some code meanings depend on it.
• Try a reset. Unplug the washer or switch off its breaker for 10 minutes. This clears many one-off glitches without tools.
• Keep a towel and a shallow pan nearby. Many fixes involve water left in the drum or drain pump.