Guides Search

Home › Kenmore › Dryers › F26

Kenmore Dryer F26 Error Code

Drive motor fault on the Elite Oasis on Kenmore dryers.

KenmoreAll Kenmore dryer codes

F26
May need a pro

The main board has spotted a problem with the motor that turns the drum. A loose connection between the board and motor is checked first; if the wiring is fine, the motor is replaced.

Compatible models

The Kenmore Elite Oasis dryer, according to Sears PartsDirect.

Also shown as

No other codes are listed for this fault.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read Kenmore dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Kenmore F26

  1. Check the drum by hand

    Unplug the dryer, empty it and turn the drum by hand. Note whether it moves smoothly or feels stuck or gritty.

  2. Reset once

    Plug it back in and start a cycle with a small load. If the code returns or the drum doesn't turn, stop.

When to call a technician

The motor wiring sits inside the cabinet, so book a technician to check it and replace the drive motor if needed.

Parts linked to F26

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Kenmore models show the F26 code?

The Kenmore Elite Oasis dryer, according to Sears PartsDirect.

Can I fix Kenmore F26 myself?

Only the basic checks. You can safely try the steps above, but F26 usually points to a part or fault that needs a technician.

Other Kenmore dryer codes

Last reviewed 2026-10-21. Codes and steps can vary by model; check your owner's manual.

Sources we checked