Kenmore Dryer F02 / F2E1 Error Code

A button on the panel is stuck on Kenmore dryers.

F02 / F2E1

Moderate DIY

The control sees a key that stays pressed. A swollen or cracked membrane, sticky residue around a button, or a cleaner that seeped behind the panel can cause it. If the key won't release, the keypad assembly has to be replaced.

Compatible models

Kenmore Elite dryers, the Kenmore Elite Oasis dryer and Kenmore 110 model VMAX dryers; 417 dryers report a stuck key as E68.

Also shown as

F:02 on Elite models, F-02 on the Elite Oasis and F2 E1 on the 110 VMAX. On 417 dryers the stuck-key code is E68, and there the fix listed is the control board.

Difficulty

Start with the safe checks below; a worn part may need replacing.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Kenmore dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Kenmore F02 / F2E1

Press each button
Press and release every key firmly, one at a time. Feel for one that's mushy, raised or doesn't click back.
Clean around the keys
Unplug the dryer. Wipe the panel with a cloth that's barely damp with mild soapy water, working around the edges of the stuck key. Don't spray anything straight onto the panel.
Power cycle
Leave the dryer unplugged for a minute, then plug it back in and see if the code is gone.

When to call a technician

If the key stays stuck, the user interface (or, on Elite models, whichever of the two console assemblies holds that key) needs replacing. On a 417, the control board is the listed part.

Parts linked to F02 / F2E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Kenmore models show the F02 / F2E1 code?

Kenmore Elite dryers, the Kenmore Elite Oasis dryer and Kenmore 110 model VMAX dryers; 417 dryers report a stuck key as E68.

Can I fix Kenmore F02 / F2E1 myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear F02 / F2E1, the cause is likely a worn part that needs replacing.

Other Kenmore dryer codes

Last reviewed 2026-10-21. Codes and steps can vary by model; check your owner's manual.

Sources we checked