Choose your LG appliance
- LG Washers15 codes
- LG Dryers14 codes
- LG Dishwashers16 codes
- LG Refrigerators17 codes
- LG Air Conditioners13 codes
About LG
LG Electronics is a South Korean manufacturer and one of the best-selling appliance brands in the US. LG appliances show short letter-and-number codes on the main control panel, and many recent models can also report them to the LG ThinQ app.
LG washer error codes
- OEWater won't drain
- IEWasher isn't filling with water
- UELoad is unbalanced
- dEDoor or lid won't lock
- LEMotor is locked or overloaded
- FETub has overfilled
- PEWater level sensor problem
- tETemperature sensor error
LG dryer error codes
- d80Exhaust vent is restricted (Flow Sense)
- tE1Temperature sensor (thermistor) fault
- tE2Thermistor fault, often in cold weather
- HSMoisture (humidity) sensor problem
- dEDoor is not closed
- F0Lint filter not detected
- nPNo power reaching the heater
- PSWrong voltage through the power cord
LG dishwasher error codes
- IENot filling with enough water
- OENot draining
- AE / E1Leak detected in the base
- FEToo much water in the tub
- bEToo many suds
- HEWater not heating properly
- tETemperature sensor problem
- LE / CEWash motor problem
LG refrigerator error codes
- OFFFridge is in demo (display) mode
- Er FFFreezer fan is blocked or not running
- Er rFRefrigerator fan is not running properly
- Er dHDefrost cycle failed
- Er IFIce maker fan problem
- Er ISIce maker sensor fault
- Er ItIce maker motor or assembly fault
- Er gFWater flow sensor error
LG air conditioner error codes
- CH05Indoor and outdoor units aren't communicating
- CH01 / CH02 / CH06Temperature sensor fault
- CH03Wired wall controller problem
- CH04Drain problem or water tank full
- CH07Indoor units set to conflicting modes
- CH10Indoor fan motor problem
- CH67Outdoor fan blocked or faulty
- CH61Unit overheating
All 13 LG air conditioner codes
Before you start
- Find your model number. It's on the rating label, usually inside the door or lid, on the frame, or on the back or side panel.
- Try a reset. Unplug the appliance or switch off its breaker for 10 minutes. Many codes are one-off glitches.
- Stay safe. Never bypass safety switches or work on live wiring, gas or refrigerant lines. Each guide tells you when to call a technician.