Search

Home › LG › Dishwashers › OE

LG Dishwasher OE Error Code

Not draining. What it means, which models show it, and how to clear it, easiest fix first.

LGAll LG dishwasher codes

OE
Moderate DIY

Water was not fully pumped out of the tub. Most often the filter is clogged with food or the drain hose is kinked or blocked; installation problems with the drain hose can also cause it.

Compatible models

LG doesn't publish a model list for this code; it appears on LG dishwashers with a digital display. Check your owner's manual.

Also shown as

Some LG parts references list a similar drain fault as DE. Check your owner's manual for the code your model uses.

Difficulty

Start with the safe checks below; a worn part may need replacing.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix LG OE

  1. Clean the filter

    Wait about 30 minutes after a cycle so the water cools, then unplug the dishwasher. Twist out the filter assembly from the tub floor, rinse it under running water with a soft brush, and lock it back in place. LG suggests doing this every one to two weeks.

  2. Check the drain hose

    Close the water shut-off valve first, as LG advises before handling the drain hose. Under the sink, look for kinks, crushed spots or clogs in the drain hose. The hose's outlet end (where it connects at the sink or disposer) should sit at least 12 in (30 cm) above the floor; lower than that can let sink water and odors back into the dishwasher.

  3. Clear the sink drain or disposer

    If the hose connects to a garbage disposer, run the disposer to clear food. On a newly installed disposer, make sure the knockout plug in its dishwasher inlet was removed.

  4. Force a drain

    Plug the unit back in, turn it on and press and hold Start for about three seconds. The pump should run for two to three minutes. If water sits above the filter afterward, stop there.

When to call a technician

If water still pools above the filter after cleaning it and checking the hose, the drain pump likely needs service.

Parts linked to OE

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does OE mean on a LG dishwasher?

Water was not fully pumped out of the tub. Most often the filter is clogged with food or the drain hose is kinked or blocked; installation problems with the drain hose can also cause it.

Which LG models show the OE code?

LG doesn't publish a model list for this code; it appears on LG dishwashers with a digital display. Check your owner's manual.

Can I fix LG OE myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear OE, the cause is likely a worn part that needs replacing.

What if OE keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when OE appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other LG dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked