Home › LG › Dishwashers › LE / CE
LG Dishwasher LE / CE Error Code
Wash motor problem. What it means, which models show it, and how to clear it, easiest fix first.
The wash (circulation) motor is not running as it should. LG points to the motor itself or the wiring harness between the motor and the control board; debris in the sump is worth ruling out before calling for service.
Compatible models
LG doesn't publish a model list for this code; it appears on LG dishwashers with a digital display. Check your owner's manual.
Also shown as
LG lists CE and LE as the same motor fault on different models.
Difficulty
Try the basic checks, but the usual fix is a technician's job.
How to fix LG LE / CE
Check for obstructions
Unplug the dishwasher or switch off its breaker. Remove the lower rack and filter and look for broken glass, bones or other debris in the sump; wear kitchen gloves and pick out glass carefully. Also make sure the racks are not overloaded.
Reset the power
Turn the dishwasher off, then switch off its circuit breaker for about 10 seconds and switch it back on. Power the unit up and start a fresh cycle to see whether the code returns.
When to call a technician
If the code returns after a reset with no obstruction, request service; the motor or its wiring needs testing.
Parts linked to LE / CE
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
- circulation pump motor
- wiring harness
Order parts by your full model number so they fit.
Frequently asked questions
What does LE / CE mean on a LG dishwasher?
The wash (circulation) motor is not running as it should. LG points to the motor itself or the wiring harness between the motor and the control board; debris in the sump is worth ruling out before calling for service.
Which LG models show the LE / CE code?
LG doesn't publish a model list for this code; it appears on LG dishwashers with a digital display. Check your owner's manual.
Can I fix LG LE / CE myself?
Only the basic checks. You can safely try the steps above, but LE / CE usually points to a part or fault that needs a technician.
What if LE / CE keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when LE / CE appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Other LG dishwasher codes
- IENot filling with enough water
- OENot draining
- AE / E1Leak detected in the base
- FEToo much water in the tub
- bEToo many suds
- HEWater not heating properly
- tETemperature sensor problem
- nESpray arm control (vario) problem
- PEWater level sensor problem
- F31Heat dry fan not running
- F35Heat dry temperature fault
- F37Auto-open door not working
- PFPower interruption
- CLControl lock is on
- CRStuck in test mode
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.