LG Washer FE Error Code
Tub has overfilled. Here is what it means and how to clear it, easiest fix first.
The washer sensed more water in the tub than it should have. This usually means the water inlet valve is not shutting off or the water level sensor is misreading the level.
Listed for both front-load and top-load models.
How to fix LG FE
Shut off the water
Turn off both supply faucets behind the washer right away to stop more water from entering.
Drain the extra water
Run a Drain or Spin Only cycle to pump out the excess water. If water has spread across the floor toward the outlet or cord, don't touch the plug; switch off the washer's breaker instead and call for service.
Unplug until repaired
Once the tub is drained, unplug the washer and leave both faucets off. LG advises keeping it unplugged until it has been repaired, so don't run test cycles in the meantime.
When to call a technician
An overfill that repeats points to a faulty inlet valve or water level sensor, which a technician should replace; don't keep running the washer in the meantime.
Parts that commonly cause FE
- water inlet valve
- water level (pressure) sensor
Order parts by your exact model number so they fit.
Other LG washer codes
- OEWater won't drain
- IEWasher isn't filling with water
- UELoad is unbalanced
- dEDoor or lid won't lock
- LEMotor is locked or overloaded
- PEWater level sensor problem
- tETemperature sensor error
- SudToo many suds
- CLControl lock is on
- PFPower was interrupted
- CEMotor current too high
- dHEDrying fan motor problem
- FFWasher is frozen
- tCLTime to clean the tub
Frequently asked questions
What does FE mean on a LG washer?
The washer sensed more water in the tub than it should have. This usually means the water inlet valve is not shutting off or the water level sensor is misreading the level.
Can I fix LG FE myself?
Only the basic checks. You can safely try the steps above, but FE usually points to a part or fault that needs a technician.
What if FE keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when FE appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.