Search

Home › Frigidaire › Washers › EA2

Frigidaire Washer EA2 Error Code

Power supply out of range on Frigidaire washers.

FrigidaireAll Frigidaire washer codes

EA2
May need a pro

Incoming power is outside the washer's limits. EA2 itself means the supply voltage is too high (above about 130 V); the neighboring codes cover low voltage and the wrong frequency.

Compatible models

Newer Frigidaire front-loaders such as the FAFW4011LB and FAFW4221. The older Affinity ATF7000FE uses EB1 to EB3 instead.

Also shown as

Newer front-loaders use EA1 (frequency), EA2 (high voltage), EA3 (low voltage), EA5 and EAE. Older Affinity models use EB1, EB2 and EB3 for the same frequency and voltage checks.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read Frigidaire washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Frigidaire EA2

  1. Plug in directly

    Unplug the washer and plug it straight into its own wall outlet, without an extension cord or power strip.

  2. Look for wider power problems

    Notice whether lights flicker or other appliances act up. If they do, the problem is likely the house supply.

  3. Reset after the power checks

    Restore power after 5 minutes off and run a short program to check.

When to call a technician

Power trouble showing up elsewhere in the house is a job for an electrician. If the supply is normal and EA2 persists, a technician should check the control board.

Parts linked to EA2

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Frigidaire models show the EA2 code?

Newer Frigidaire front-loaders such as the FAFW4011LB and FAFW4221. The older Affinity ATF7000FE uses EB1 to EB3 instead.

Can I fix Frigidaire EA2 myself?

Only the basic checks. You can safely try the steps above, but EA2 usually points to a part or fault that needs a technician.

Other Frigidaire washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked