Search

Home › Frigidaire › Washers › E31

Frigidaire Washer E31 Error Code

Pressure sensor not reporting on Frigidaire washers.

FrigidaireAll Frigidaire washer codes

E31
May need a pro

The pressure sensor that tracks the water level isn't reporting properly to the control. The sensor itself, its wiring, or a clogged air trap or hose can be the cause.

Compatible models

Frigidaire front-loaders with a digital display, including the FAFW4011LB, FAFW4221 and Affinity ATF7000FE. The FFTW4120SW top-loader shows F8 for a failed level sensor.

Also shown as

E31 (sensor not communicating), E32 (sensor calibration) and E38 (air trap clogged) all point to the water level sensing system. Some top-load models show F8 for a failed water level sensor.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read Frigidaire washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Frigidaire E31

  1. Power-cycle it

    Cut the power for 5 minutes and start a short cycle to see if the code is still there.

  2. Check the drain hose

    If water is left in the drum, make sure the drain hose isn't kinked and run Drain & Spin so the next cycle starts empty.

When to call a technician

If E31 comes back, a technician should check the sensor, its air hose and the wiring, all of which sit inside the cabinet.

Parts linked to E31

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Frigidaire models show the E31 code?

Frigidaire front-loaders with a digital display, including the FAFW4011LB, FAFW4221 and Affinity ATF7000FE. The FFTW4120SW top-loader shows F8 for a failed level sensor.

Can I fix Frigidaire E31 myself?

Only the basic checks. You can safely try the steps above, but E31 usually points to a part or fault that needs a technician.

Other Frigidaire washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked