Home › Whirlpool › Dishwashers › F7E2
Whirlpool Dishwasher F7E2 Error Code
Wash motor error. What it means, which models show it, and how to clear it, easiest fix first.
WhirlpoolAll Whirlpool dishwasher codes
The control detected a problem with the motor that circulates water during washing. A reset can clear a one-time glitch, but a repeat code needs a technician.
Compatible models
Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dishwashers with a digital display. Check your owner's manual.
Also shown as
On models without a digital display, the Clean light shows this as 7 quick flashes, a short pause, then 2 flashes, repeating after a longer pause. Whirlpool's current pages call this a wash motor error; an older Sears PartsDirect code table says the heating element won't shut off, which may apply to some older models. Check your owner's manual or tech sheet for your model.
Difficulty
Try the basic checks, but the usual fix is a technician's job.
How to fix Whirlpool F7E2
Reset the control
Unplug the dishwasher for 30 seconds, then plug it back in. If it is hard-wired, switch off its breaker at the electrical panel for 30 seconds instead, then switch it back on and try a cycle.
Note the code and model number
Write down the exact code, when in the cycle it appeared, and the model and serial numbers from the rating label (usually on the side or top edge of the door or tub). With nothing safe left to check yourself, this lets the technician bring the right part on the first visit.
When to call a technician
If F7E2 returns after a reset, schedule service.
Parts linked to F7E2
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
- circulation pump motor
- control board
Order parts by your full model number so they fit.
Frequently asked questions
What does F7E2 mean on a Whirlpool dishwasher?
The control detected a problem with the motor that circulates water during washing. A reset can clear a one-time glitch, but a repeat code needs a technician.
Which Whirlpool models show the F7E2 code?
Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dishwashers with a digital display. Check your owner's manual.
Can I fix Whirlpool F7E2 myself?
Only the basic checks. You can safely try the steps above, but F7E2 usually points to a part or fault that needs a technician.
What if F7E2 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when F7E2 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Other Whirlpool dishwasher codes
- F9E1Long drain (slow or no drain)
- F9E2Drain motor error
- F8E1 / H2ONo water detected
- F8E2Fill valve electrical error
- F8E4Water in the drip tray
- F8E5Fill valve stuck open
- F6E3Too many suds
- F6E4Water float switch fault
- F4E2 / F4E3Heating error
- F3E2Temperature or soil sensor fault
- F6E1Control panel or main control error
- F1E1Control board fault
- F1E2 / F2E2Control communication error
- F2E1Stuck button or console error
- FAE4 / F10E4Diverter valve error
- FAE5 / F10E5Diverter leak
- Sanitize light flashingLoad was not sanitized
- Control lock light blinks 3 timesControls are locked
- All cycle and option lights flashingCycle paused (door opened)
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.