Home › Whirlpool › Dishwashers › F2E1
Whirlpool Dishwasher F2E1 Error Code
Stuck button or console error. What it means, which models show it, and how to clear it, easiest fix first.
WhirlpoolAll Whirlpool dishwasher codes
A button on the control panel seems to be stuck down, or the panel itself has a fault.
Compatible models
Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dishwashers with a digital display. Check your owner's manual.
Also shown as
On models without a digital display, the Clean light shows this as 2 quick flashes, a short pause, then 1 flash, repeating after a longer pause.
Difficulty
Start with the safe checks below; a worn part may need replacing.
How to fix Whirlpool F2E1
Wipe the control panel
Unplug the dishwasher. Wipe the buttons with a soft, barely damp cloth and dry them. Press each button gently to check that none feels stuck.
Reset the control
Unplug the dishwasher for 30 seconds, then plug it back in. If it is hard-wired, switch off its breaker at the electrical panel for 30 seconds instead, then switch it back on and try a cycle.
When to call a technician
If F2E1 returns, schedule service; the control panel or main board likely needs replacing.
Parts linked to F2E1
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
- user interface board
- control board
Order parts by your full model number so they fit.
Frequently asked questions
What does F2E1 mean on a Whirlpool dishwasher?
A button on the control panel seems to be stuck down, or the panel itself has a fault.
Which Whirlpool models show the F2E1 code?
Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dishwashers with a digital display. Check your owner's manual.
Can I fix Whirlpool F2E1 myself?
Often. The first steps above are safe checks a homeowner can do. If they don't clear F2E1, the cause is likely a worn part that needs replacing.
What if F2E1 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when F2E1 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Other Whirlpool dishwasher codes
- F9E1Long drain (slow or no drain)
- F9E2Drain motor error
- F8E1 / H2ONo water detected
- F8E2Fill valve electrical error
- F8E4Water in the drip tray
- F8E5Fill valve stuck open
- F6E3Too many suds
- F6E4Water float switch fault
- F7E2Wash motor error
- F4E2 / F4E3Heating error
- F3E2Temperature or soil sensor fault
- F6E1Control panel or main control error
- F1E1Control board fault
- F1E2 / F2E2Control communication error
- FAE4 / F10E4Diverter valve error
- FAE5 / F10E5Diverter leak
- Sanitize light flashingLoad was not sanitized
- Control lock light blinks 3 timesControls are locked
- All cycle and option lights flashingCycle paused (door opened)
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.