Home › Dishwashers › Whirlpool › F8E5
Whirlpool Dishwasher F8E5 Error Code
Fill valve stuck open. Here is what it means and how to clear it, easiest fix first.
The water inlet valve is not closing, so water may keep flowing into the dishwasher. The valve needs to be replaced by a technician.
On models without a digital display, the Clean light shows this as 8 quick flashes, a short pause, then 5 flashes, repeating after a longer pause.
How to fix Whirlpool F8E5
Shut off the water
Turn off the dishwasher's water supply valve, usually under the sink, right away.
Let the dishwasher drain
Press Cancel once to silence the alarm and keep the door closed. Leave the power on so the pump can remove the water. If you cannot shut off the water, or water is near the outlet or cord, switch off the dishwasher's breaker instead.
When to call a technician
Leave the water off and schedule service; a valve that will not close usually has to be replaced.
Parts that commonly cause F8E5
- water inlet valve
Order parts by your exact model number so they fit.
Other Whirlpool dishwasher codes
- F9E1Long drain (slow or no drain)
- F9E2Drain motor error
- F8E1 / H2ONo water detected
- F8E2Fill valve electrical error
- F8E4Water in the drip tray
- F6E3Too many suds
- F6E4Water float switch fault
- F7E2Wash motor error
- F4E2 / F4E3Heating error
- F3E2Temperature or soil sensor fault
- F6E1Control panel or main control error
- F1E1Control board fault
- F1E2 / F2E2Control communication error
- F2E1Stuck button or console error
- FAE4 / F10E4Diverter valve error
- FAE5 / F10E5Diverter leak
- Sanitize light flashingLoad was not sanitized
- Control lock light blinks 3 timesControls are locked
- All cycle and option lights flashingCycle paused (door opened)
Frequently asked questions
What does F8E5 mean on a Whirlpool dishwasher?
The water inlet valve is not closing, so water may keep flowing into the dishwasher. The valve needs to be replaced by a technician.
Can I fix Whirlpool F8E5 myself?
Only the basic checks. You can safely try the steps above, but F8E5 usually points to a part or fault that needs a technician.
What if F8E5 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when F8E5 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.