Search

Home › Whirlpool › Dishwashers › All cycle and option lights flashing

Whirlpool Dishwasher All cycle and option lights flashing Error Code

Cycle paused (door opened). What it means, which models show it, and how to clear it, easiest fix first.

WhirlpoolAll Whirlpool dishwasher codes

All cycle and option lights flashing
Easy DIY fix

On select models, all the cycle and option lights flash when the door is opened mid-cycle, to show the cycle is paused. It can also mean the door didn't latch fully after you closed it.

Compatible models

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dishwashers with a digital display. Check your owner's manual.

Also shown as

Select models only. A Clean light flashing in a repeating two-part pattern is an error code instead; see the F-codes on this page.

Difficulty

Most people can clear this one at home with simple checks.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Whirlpool All cycle and option lights flashing

  1. Close the door firmly

    Push the door shut until it latches. After a short delay the lights stop flashing and the cycle picks up where it left off.

  2. Reset the control

    Unplug the dishwasher for 30 seconds, then plug it back in. If it is hard-wired, switch off its breaker at the electrical panel for 30 seconds instead, then switch it back on and try a cycle.

When to call a technician

If the lights keep flashing with the door latched, the door latch or control may be faulty; schedule service.

Parts linked to All cycle and option lights flashing

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does All cycle and option lights flashing mean on a Whirlpool dishwasher?

On select models, all the cycle and option lights flash when the door is opened mid-cycle, to show the cycle is paused. It can also mean the door didn't latch fully after you closed it.

Which Whirlpool models show the All cycle and option lights flashing code?

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dishwashers with a digital display. Check your owner's manual.

Can I fix Whirlpool All cycle and option lights flashing myself?

Usually, yes. Most All cycle and option lights flashing problems clear with simple checks you can do at home. Start with the first step above: close the door firmly.

What if All cycle and option lights flashing keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when All cycle and option lights flashing appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Whirlpool dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked