Home › LG › Dishwashers › PF
LG Dishwasher PF Error Code
Power interruption. What it means, which models show it, and how to clear it, easiest fix first.
The dishwasher lost power or saw an interruption during operation and is protecting itself. Repeated PF codes can point to a circuit that does not suit the dishwasher.
Compatible models
LG doesn't publish a model list for this code; it appears on LG dishwashers with a digital display. Check your owner's manual.
Also shown as
No other codes are listed for this fault.
Difficulty
Most people can clear this one at home with simple checks.
How to fix LG PF
Clear the code
Press any key on the control panel. The display can take about 10 seconds to clear, then restart your cycle.
Check the circuit
LG calls for a dedicated, grounded 120 V, 60 Hz circuit rated for at least 15 A. Do not run the dishwasher from an extension cord or power strip; if you are not sure how the circuit is set up, ask an electrician.
When to call a technician
If PF keeps appearing without power outages, have an electrician check the circuit and outlet.
Frequently asked questions
What does PF mean on a LG dishwasher?
The dishwasher lost power or saw an interruption during operation and is protecting itself. Repeated PF codes can point to a circuit that does not suit the dishwasher.
Which LG models show the PF code?
LG doesn't publish a model list for this code; it appears on LG dishwashers with a digital display. Check your owner's manual.
Can I fix LG PF myself?
Usually, yes. Most PF problems clear with simple checks you can do at home. Start with the first step above: clear the code.
What if PF keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when PF appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Other LG dishwasher codes
- IENot filling with enough water
- OENot draining
- AE / E1Leak detected in the base
- FEToo much water in the tub
- bEToo many suds
- HEWater not heating properly
- tETemperature sensor problem
- LE / CEWash motor problem
- nESpray arm control (vario) problem
- PEWater level sensor problem
- F31Heat dry fan not running
- F35Heat dry temperature fault
- F37Auto-open door not working
- CLControl lock is on
- CRStuck in test mode
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.