Home › Dryers › Whirlpool › F2E1
Whirlpool Dryer F2E1 Error Code
Stuck button on the control panel. Here is what it means and how to clear it, easiest fix first.
The control thinks one of the buttons is being held down permanently. A key can stick after being pressed hard, or from spills or grime around the panel. A worn keypad can also cause it.
Older Cabrio, Duet, and Maytag Bravos dryers show F-02 (F:02 on Duet) for a keypad fault. Maytag Centennial dryers also use F2 E1. Whirlpool lists the related F2E2 code as a keypad or control fault and handles it with the same reset.
How to fix Whirlpool F2E1
Press each button
Firmly press and release every button on the control panel one at a time. Feel for one that does not spring back or click like the others.
Clean around the keys
Unplug the dryer, then wipe the panel with a cloth that is only slightly damp, working around the edges of the buttons. Do not spray cleaner onto the panel, and dry it fully before restoring power.
Reset the dryer
Switch off the breaker(s) for 1 minute, turn them back on, start a Timed Dry cycle, and watch for about 1 minute to see if the code returns.
When to call a technician
If a key stays stuck or the code keeps coming back, the user interface (keypad) assembly usually needs to be replaced by a technician.
Parts that commonly cause F2E1
- User interface / keypad assembly
Order parts by your exact model number so they fit.
Other Whirlpool dryer codes
- AF / F4E3Restricted airflow: lint screen or vent blocked
- PFPower was interrupted during the cycle
- L2 / F4E4Low or missing supply voltage (electric dryers)
- ERRDoor not fully closed and latched
- LocControl lock is turned on
- F3E2Moisture sensor not reading the load
- F2E4 / F2E5Control panel (user interface) fault
- F1E1Main control board fault
- F3E1Exhaust temperature sensor (thermistor) fault
- F3E3Inlet temperature sensor (thermistor) fault
- F4E1 / F4E2Heater system or heater relay fault
- F6E1 / F6E2 / F6E3Communication error between control boards
- F7E1Drive motor system fault
- E1 / E2Temperature sensor fault (older electronic models)
Frequently asked questions
What does F2E1 mean on a Whirlpool dryer?
The control thinks one of the buttons is being held down permanently. A key can stick after being pressed hard, or from spills or grime around the panel. A worn keypad can also cause it.
Can I fix Whirlpool F2E1 myself?
Often. The first steps above are safe checks a homeowner can do. If they don't clear F2E1, the cause is likely a worn part that needs replacing.
What if F2E1 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when F2E1 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.