Search

Home › Whirlpool › Dryers › F1E1

Whirlpool Dryer F1E1 Error Code

Main control board fault. What it means, which models show it, and how to clear it, easiest fix first.

WhirlpoolAll Whirlpool dryer codes

F1E1
May need a pro

The dryer's main electronic control has detected a fault in itself. For newer Cabrio and Maytag Centennial dryers, Sears PartsDirect ties F1E1 to a motor relay on the board that is stuck in the on position. Older models report a main control board failure as F-01.

Compatible models

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dryers with a digital display. Check your owner's manual.

Also shown as

Older Cabrio and Maytag Bravos dryers show F-01, and Duet dryers show F:01, for a main control board failure. Maytag Centennial dryers also use F1 E1.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Whirlpool F1E1

  1. Reset the dryer

    Switch off the dryer's breaker(s), or unplug it, for 5 minutes. Restore power, start a Timed Dry cycle, and watch for about 1 minute to see if the code returns.

  2. Stop if the drum won't stop

    If the drum keeps turning when the dryer should be off, unplug it or switch off the breaker(s) and do not use it until it has been repaired.

When to call a technician

If F1E1 returns after a reset, the main control board usually needs to be diagnosed and replaced by a technician.

Parts linked to F1E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does F1E1 mean on a Whirlpool dryer?

The dryer's main electronic control has detected a fault in itself. For newer Cabrio and Maytag Centennial dryers, Sears PartsDirect ties F1E1 to a motor relay on the board that is stuck in the on position. Older models report a main control board failure as F-01.

Which Whirlpool models show the F1E1 code?

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dryers with a digital display. Check your owner's manual.

Can I fix Whirlpool F1E1 myself?

Only the basic checks. You can safely try the steps above, but F1E1 usually points to a part or fault that needs a technician.

What if F1E1 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when F1E1 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Whirlpool dryer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked