Frigidaire Dryer E4A Error Code

Dry time ran too long on Frigidaire dryers.

E4A

Moderate DIY

The cycle went past the normal maximum drying time. Sears PartsDirect says this usually traces back to the heating system (the element on electric models, the burner parts on gas ones). A clogged lint screen or vent can also stretch dry times because wet air can't get out.

Compatible models

Frigidaire dryers covered by the Sears PartsDirect error code table; the page doesn't give model numbers.

Also shown as

Sears PartsDirect lists E4A in its Frigidaire dryer table.

Difficulty

Start with the safe checks below; a worn part may need replacing.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Frigidaire dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Frigidaire E4A

Clean the lint screen and vent
Clear the lint screen, then unplug the dryer and check the duct behind it for kinks or a crushed section. Outside, the vent flap should open wide while the dryer runs.
Check the breaker on an electric dryer
A dryer that tumbles but barely warms up may have lost one side of its 240-volt supply. Turn the double breaker fully off and back on.
Dry a normal load
An overstuffed or dripping-wet load takes longer to dry. Try a medium load that's been through a full spin in the washer and see whether the code repeats.

When to call a technician

If airflow is good and the dryer still runs long or cold, the heating element on an electric model, or the burner parts on a gas model, need testing by a technician. Don't work on gas parts, and leave the house and call the gas company if you smell gas.

Parts linked to E4A

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Frigidaire models show the E4A code?

Frigidaire dryers covered by the Sears PartsDirect error code table; the page doesn't give model numbers.

Can I fix Frigidaire E4A myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear E4A, the cause is likely a worn part that needs replacing.

Other Frigidaire dryer codes

Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.

Sources we checked

www.searspartsdirect.com