Frigidaire Dryer E8C Error Code

High-limit thermostat tripped too often on Frigidaire dryers.

E8C

Moderate DIY

The high-limit thermostat, a safety part that cuts the heat when it gets too hot, has tripped too many times in a short period. Restricted airflow is the main suspect. AppliancePartsPros lists a clogged lint filter, a blocked exhaust, leaky duct joints, damaged blower blades, worn drum seals and a closet install without enough air as causes. Sears PartsDirect adds a stuck heater relay on the board.

Compatible models

Frigidaire dryers in the Sears PartsDirect table, and Affinity dryers in the AppliancePartsPros guide; neither names model numbers.

Also shown as

Both Sears PartsDirect (Frigidaire dryers) and AppliancePartsPros (Affinity dryers) list E8C.

Difficulty

Start with the safe checks below; a worn part may need replacing.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Frigidaire dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Frigidaire E8C

Clear the lint and the exhaust
Clean the lint filter, then unplug the dryer and vacuum the filter slot. Disconnect the duct and brush or vacuum it out, and make sure the outside flap swings freely.
Seal the duct joints
Look for joints that have pulled apart or leak lint. Reconnect them and wrap with foil tape (not screws, which snag lint).
Give a closet install some air
If the dryer lives in a closet, check the door has the louvers or openings the installation instructions call for, and that the door isn't sealing the dryer in.

When to call a technician

If airflow checks out and the code returns, or the dryer seems to heat nonstop, a technician should look at the blower, drum seals and control board relay. Never bypass a high-limit thermostat or thermal fuse.

Parts linked to E8C

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Frigidaire models show the E8C code?

Frigidaire dryers in the Sears PartsDirect table, and Affinity dryers in the AppliancePartsPros guide; neither names model numbers.

Can I fix Frigidaire E8C myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear E8C, the cause is likely a worn part that needs replacing.

Other Frigidaire dryer codes

Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.

Sources we checked