Home › Frigidaire › Dryers › E24 / E25
Frigidaire Dryer E24 / E25 Error Code
Thermistor shorted or open on Frigidaire dryers.
FrigidaireAll Frigidaire dryer codes
The control thermistor, which reads drum air temperature, is either shorted or open, or its wiring is. Without that reading the control can't manage the heat. Both AppliancePartsPros and Sears PartsDirect put the normal reading at about 50,000 ohms (AppliancePartsPros allows 10% either way), a check for a technician.
Compatible models
Sears PartsDirect lists these for Frigidaire dryers; AppliancePartsPros names the Affinity line.
Also shown as
Sears PartsDirect and AppliancePartsPros both list E24 and E25; the latter covers Affinity dryers.
Difficulty
Try the basic checks, but the usual fix is a technician's job.
Not sure you are reading the code right? See how to read Frigidaire dryer codes.
How to fix Frigidaire E24 / E25
Unplug for 5 minutes
Disconnect power, wait 5 minutes, reconnect and run a heated cycle. Watch whether the code returns.
Keep the lint path clean
While you wait for service, clean the lint screen before every load and don't leave the dryer running unattended.
When to call a technician
The thermistor and its wiring are inside the cabinet, so testing and replacement is technician work. If the sensor tests fine, the electronic control is next on the list.
Parts linked to E24 / E25
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Frequently asked questions
Which Frigidaire models show the E24 / E25 code?
Sears PartsDirect lists these for Frigidaire dryers; AppliancePartsPros names the Affinity line.
Can I fix Frigidaire E24 / E25 myself?
Only the basic checks. You can safely try the steps above, but E24 / E25 usually points to a part or fault that needs a technician.
Other Frigidaire dryer codes
- E4ADry time ran too long
- E5BNo heat detected
- E8CHigh-limit thermostat tripped too often
- E68Stuck key on the control
- E64Heating element circuit open
- E10 / E11 / E12Control board communication error
- EAFElectronic control board failure
Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.