Guides Search

Home › KitchenAid › Dishwashers › F6E1

KitchenAid Dishwasher F6E1 Error Code

User interface or main control error on KitchenAid dishwashers.

KitchenAidAll KitchenAid dishwasher codes

F6E1
May need a pro

The control panel and the main control board aren't working together correctly. KitchenAid lists the user interface and the main control as the possible causes.

Compatible models

Part of KitchenAid's standard dishwasher code set; there's no model list.

Also shown as

No other codes are listed for this fault.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read KitchenAid dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix KitchenAid F6E1

  1. Give the board a reset

    Cut power for 30 seconds. When it comes back, press a few keys and see if the panel responds normally.

  2. Try a cycle

    Start a normal cycle. If F6E1 shows again, stop and book a repair.

When to call a technician

If F6E1 is still there after a power reset, call for service. One of the control boards likely needs replacing.

Parts linked to F6E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which KitchenAid models show the F6E1 code?

Part of KitchenAid's standard dishwasher code set; there's no model list.

Can I fix KitchenAid F6E1 myself?

Only the basic checks. You can safely try the steps above, but F6E1 usually points to a part or fault that needs a technician.

Other KitchenAid dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked