Search

Home › KitchenAid › Dishwashers › F8E2

KitchenAid Dishwasher F8E2 Error Code

Fill valve electrical fault on KitchenAid dishwashers.

KitchenAidAll KitchenAid dishwasher codes

F8E2
May need a pro

Something is wrong on the electrical side of the water inlet valve, so the control can't drive it properly. KitchenAid's first check is for a leak at the valve connection.

Compatible models

KitchenAid lists it for its dishwashers without naming particular models.

Also shown as

No other codes are listed for this fault.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read KitchenAid dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix KitchenAid F8E2

  1. Look for leaks at the inlet valve

    Switch off power at the breaker first. Remove the drip tray at the bottom front and check the water inlet valve connection for drips or a wet connector.

  2. Restart from cold

    Leave the power off for a full 30 seconds, then turn it back on and start a cycle.

When to call a technician

If F8E2 returns after a reset, call for service. The inlet valve or its wiring needs testing with power applied, which is technician work.

Parts linked to F8E2

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which KitchenAid models show the F8E2 code?

KitchenAid lists it for its dishwashers without naming particular models.

Can I fix KitchenAid F8E2 myself?

Only the basic checks. You can safely try the steps above, but F8E2 usually points to a part or fault that needs a technician.

Other KitchenAid dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked