Search

Home › KitchenAid › Dishwashers › F9E1

KitchenAid Dishwasher F9E1 Error Code

Long drain (water not pumping out) on KitchenAid dishwashers.

KitchenAidAll KitchenAid dishwasher codes

F9E1
Moderate DIY

Water is still sitting in the tub after the time the control allows for draining. A packed filter, a kinked or blocked drain hose, a clogged disposer or air gap, or a tub full of suds are the usual culprits.

Compatible models

Shows up on KitchenAid built-in dishwashers that use F#E# codes. KitchenAid doesn't tie it to specific models.

Also shown as

No other codes are listed for this fault.

Difficulty

Start with the safe checks below; a worn part may need replacing.

Not sure you are reading the code right? See how to read KitchenAid dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix KitchenAid F9E1

  1. Clean the filter

    Unplug the dishwasher or switch off its breaker first. Twist out the filter in the tub floor, rinse it under the tap and scrub off grease with a soft brush, then lock it back in.

  2. Check the hose, disposer and air gap

    Follow the drain hose from the back of the unit to the sink and straighten any kinks. Run the disposer to flush out food. On a new disposer, the knockout plug in its dishwasher inlet has to be punched out, and if you have an air gap on the sink, pop the cap and clear it.

  3. Rule out suds

    Foam can fool the drain. Use only automatic-dishwasher detergent, never hand dish soap, and let any suds settle with the door shut before you restart.

  4. Reset and test

    Do the 30-second power reset, then run a cycle and check that the tub is empty at the end.

When to call a technician

If the filter, hose, disposer and air gap are all clear and the code comes back, the drain pump or its wiring likely needs a technician.

Parts linked to F9E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which KitchenAid models show the F9E1 code?

Shows up on KitchenAid built-in dishwashers that use F#E# codes. KitchenAid doesn't tie it to specific models.

Can I fix KitchenAid F9E1 myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear F9E1, the cause is likely a worn part that needs replacing.

Other KitchenAid dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked