Home › Gree › Air Conditioners › E3
Gree Air Conditioner E3 Error Code
Low pressure protection on Gree air conditioners.
GreeAll Gree air conditioner codes
The low side of the refrigerant system dropped below a safe pressure. GREE points to a low refrigerant charge or a leak as the main thing to check once dirty filters and coils are ruled out.
Compatible models
Any GREE mini-split can show this. GREE's FAQ doesn't break it down by model, so confirm it in your manual.
Also shown as
No other codes are listed for this fault.
Difficulty
Try the basic checks, but the usual fix is a technician's job.
Not sure you are reading the code right? See how to read Gree air conditioner codes.
How to fix Gree E3
Rule out airflow problems
Clean the indoor filters and make sure nothing blocks the indoor unit's grille. Starved airflow can pull pressures down.
Don't try to add refrigerant
Refrigerant only escapes through a leak, and topping it up without finding the leak doesn't fix anything. It's also licensed work.
When to call a technician
Call a GREE dealer or licensed HVAC technician. GREE's own advice is to weigh out the charge and leak-check the system.
Parts linked to E3
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
- refrigerant charge
- refrigerant line flare connections
- air filter
Order parts by your full model number so they fit.
Frequently asked questions
Which Gree models show the E3 code?
Any GREE mini-split can show this. GREE's FAQ doesn't break it down by model, so confirm it in your manual.
Can I fix Gree E3 myself?
Only the basic checks. You can safely try the steps above, but E3 usually points to a part or fault that needs a technician.
Other Gree air conditioner codes
- E6Indoor and outdoor units can't communicate
- E1High pressure protection
- E2Indoor coil freeze protection
- E5Over-current protection
- E7Mode conflict between indoor units
- E8High temperature protection from low indoor airflow
- E9Condensate overflow protection
- H6Indoor fan airflow fault
- L3Outdoor fan airflow fault
- F1Indoor room temperature sensor fault
- F2Indoor coil sensor fault
- F3Outdoor air temperature sensor fault
- F4Outdoor coil sensor fault
- F5Compressor discharge sensor fault
- H1Defrosting (normal in heat mode)
- H5Power module (IPM) protection
- C5Jumper cap missing or wrong
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.