Maytag Washer rL Error Code
Items found during Clean Washer cycle on Maytag washers.
You started Clean Washer with something still in the drum. Nothing is wrong; that cycle needs an empty drum.
Compatible models
Maytag front-load washers that have a Clean Washer cycle.
Also shown as
Front-loaders may show rL, F0 E1 or F34.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read Maytag washer codes.
How to fix Maytag rL
Empty the drum
Open the door and take out every item, including anything caught in the door seal.
Restart Clean Washer
Close the door and start Clean Washer again.
When to call a technician
If the drum is empty and rL still appears, contact Maytag or a technician.
Frequently asked questions
Which Maytag models show the rL code?
Maytag front-load washers that have a Clean Washer cycle.
Can I fix Maytag rL myself?
Usually, yes. Most rL problems clear with simple checks you can do at home. Start with the first step above: empty the drum.
Other Maytag washer codes
- F8E1Washer is filling too slowly
- F9E1Washer is taking too long to drain
- F5E1Door or lid switch does not detect it closed
- F5E2Door or lid will not lock
- F5E3Lid lock fault
- LdULid cannot unlock
- F0E5Load is off balance or too large
- SudToo many suds
- F7E1Motor or basket speed problem
- F3E1Water level sensing problem
- F6E2Control, display or wiring fault
- HCHot and cold hoses are reversed
- OLLoad is too large
- F8E2Dispenser system problem
- LOCControl lock is on
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.