Maytag Washer OL Error Code
Load is too large on Maytag washers.
The washer judged the load too big to wash properly, so it drains the water and detergent and stops.
Compatible models
Maytag top-load HE washers that sense the load size.
Also shown as
No other codes are listed for this fault.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read Maytag washer codes.
How to fix Maytag OL
Take some items out
Take several items out so the rest can move freely in the basket.
Restart the cycle
Add fresh HE detergent, close the lid and press Start/Pause.
When to call a technician
If small loads also trigger OL, have a technician check the load sensing.
Frequently asked questions
Which Maytag models show the OL code?
Maytag top-load HE washers that sense the load size.
Can I fix Maytag OL myself?
Usually, yes. Most OL problems clear with simple checks you can do at home. Start with the first step above: take some items out.
Other Maytag washer codes
- F8E1Washer is filling too slowly
- F9E1Washer is taking too long to drain
- F5E1Door or lid switch does not detect it closed
- F5E2Door or lid will not lock
- F5E3Lid lock fault
- LdULid cannot unlock
- F0E5Load is off balance or too large
- SudToo many suds
- F7E1Motor or basket speed problem
- F3E1Water level sensing problem
- F6E2Control, display or wiring fault
- HCHot and cold hoses are reversed
- rLItems found during Clean Washer cycle
- F8E2Dispenser system problem
- LOCControl lock is on
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.