Search

Home › Maytag › Washers › F7E1

Maytag Washer F7E1 Error Code

Motor or basket speed problem on Maytag washers.

MaytagAll Maytag washer codes

F7E1
Moderate DIY

The motor or basket didn't reach the speed the cycle needs. On a newly installed front-loader, shipping bolts left in place are a likely cause, and an overloaded drum can trigger it too.

Compatible models

Maytag front-loaders and top-loaders, including the Bravos and Centennial VMW top-loaders on Sears PartsDirect's list.

Also shown as

On front-loaders Maytag describes F7 E1 as a motor speed sensing error. On Bravos top-loaders Sears PartsDirect lists it as a basket speed sensor fault, with the sensor built into the shifter; Maytag's own top-load page advises a reset, then service.

Difficulty

Start with the safe checks below; a worn part may need replacing.

Not sure you are reading the code right? See how to read Maytag washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Maytag F7E1

  1. Remove shipping bolts (new front-loaders)

    Unplug the washer. Check the back panel for the four shipping bolts and their plastic spacers; Maytag says all of them must come out before the washer is used. Your installation instructions show how.

  2. Reduce the load

    Take out some items so the drum isn't packed. With the washer unplugged, turn the drum or basket by hand and feel for any catching.

  3. Clear the code and reset

    Front-loaders: Pause/Cancel twice, then Power once. On a top-loader, or if F7E1 comes back, unplug for 5 minutes, then plug in and try a cycle.

When to call a technician

Shipping bolts out, a normal load and F7E1 still returning: the motor, its speed sensor or the drive parts need a technician.

Parts linked to F7E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Maytag models show the F7E1 code?

Maytag front-loaders and top-loaders, including the Bravos and Centennial VMW top-loaders on Sears PartsDirect's list.

Can I fix Maytag F7E1 myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear F7E1, the cause is likely a worn part that needs replacing.

Other Maytag washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked