LG Washer dHE Error Code
Drying fan motor problem. Here is what it means and how to clear it, easiest fix first.
On LG washer-dryer combos, dHE is a safety code meaning the drying fan motor isn't working as expected, so the dry cycle shuts down. A full power reset sometimes clears it.
Only appears on washer-dryer combo models that have a built-in dry cycle.
How to fix LG dHE
Reset the washer
Unplug the washer and wait about 5 minutes before plugging it back in.
Test a dry cycle alone
Power it on and run a dry-only cycle with a small load to see whether the code returns.
When to call a technician
If dHE comes back, stop using the washer and contact LG service; the fan motor area can be hot and carries high voltage, so don't open it yourself.
Parts that commonly cause dHE
- drying fan motor
- dryer heater assembly
Order parts by your exact model number so they fit.
Other LG washer codes
- OEWater won't drain
- IEWasher isn't filling with water
- UELoad is unbalanced
- dEDoor or lid won't lock
- LEMotor is locked or overloaded
- FETub has overfilled
- PEWater level sensor problem
- tETemperature sensor error
- SudToo many suds
- CLControl lock is on
- PFPower was interrupted
- CEMotor current too high
- FFWasher is frozen
- tCLTime to clean the tub
Frequently asked questions
What does dHE mean on a LG washer?
On LG washer-dryer combos, dHE is a safety code meaning the drying fan motor isn't working as expected, so the dry cycle shuts down. A full power reset sometimes clears it.
Can I fix LG dHE myself?
Only the basic checks. You can safely try the steps above, but dHE usually points to a part or fault that needs a technician.
What if dHE keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when dHE appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.