LG Washer CE Error Code
Motor current too high. Here is what it means and how to clear it, easiest fix first.
The control detected more electrical current in the motor circuit than it should. LG lists a short, a loose connection, a ground fault or a power surge as possible causes.
Listed for front-load and top-load models.
How to fix LG CE
Power-cycle the washer
Unplug the washer for at least 10 seconds, plug it back in and try a cycle.
Shut down if it repeats
If the code comes back, turn off the water supply faucets, unplug the washer and leave it off until it's inspected.
When to call a technician
A repeating CE code is an electrical fault in the motor or control circuit; do not try to diagnose it yourself, and schedule an LG-authorized repair.
Parts that commonly cause CE
- drive motor (stator)
- main control board
- motor wiring harness
Order parts by your exact model number so they fit.
Other LG washer codes
- OEWater won't drain
- IEWasher isn't filling with water
- UELoad is unbalanced
- dEDoor or lid won't lock
- LEMotor is locked or overloaded
- FETub has overfilled
- PEWater level sensor problem
- tETemperature sensor error
- SudToo many suds
- CLControl lock is on
- PFPower was interrupted
- dHEDrying fan motor problem
- FFWasher is frozen
- tCLTime to clean the tub
Frequently asked questions
What does CE mean on a LG washer?
The control detected more electrical current in the motor circuit than it should. LG lists a short, a loose connection, a ground fault or a power surge as possible causes.
Can I fix LG CE myself?
Only the basic checks. You can safely try the steps above, but CE usually points to a part or fault that needs a technician.
What if CE keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when CE appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.