Search

Home › Electrolux › Washers › E60

Electrolux Washer E60 Error Code

Heating problem on Electrolux washers.

ElectroluxAll Electrolux washer codes

E60
May need a pro

A fault in the water heating system. Electrolux uses the E60 family for these.

Compatible models

Electrolux washing machines and washer dryers that heat their own water. No model list is published.

Also shown as

Listed as E60 or similar codes.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read Electrolux washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Electrolux E60

  1. Try a lower-temperature program

    Run a cold or low-temperature program to see if the washer finishes it. That gets you through a load; it doesn't fix the fault.

  2. Reset after noting the code

    Jot the code down, cut the power for 5 minutes and run a short cycle.

When to call a technician

Heating faults involve mains-voltage parts, so call a technician if the code returns.

Parts linked to E60

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Electrolux models show the E60 code?

Electrolux washing machines and washer dryers that heat their own water. No model list is published.

Can I fix Electrolux E60 myself?

Only the basic checks. You can safely try the steps above, but E60 usually points to a part or fault that needs a technician.

Other Electrolux washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked