Search

Home › Electrolux › Washers › E11

Electrolux Washer E11 Error Code

Water supply problem or slow fill on Electrolux washers.

ElectroluxAll Electrolux washer codes

E11
Easy DIY fix

Filling is taking too long. Usually a supply valve isn't fully open, a hose is kinked, the inlet screens are clogged or the pressure is low. Less often the inlet valve or water level sensor is at fault.

Compatible models

Some Electrolux front-load washers show E11, according to AppliancePartsPros. Electrolux's own E10-family guidance covers its washing machines and washer dryers.

Also shown as

Electrolux in the UK and Europe groups this as the E10 family; depending on the model you may see E10, E11, C1, or one beep or flash.

Difficulty

Most people can clear this one at home with simple checks.

Not sure you are reading the code right? See how to read Electrolux washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Electrolux E11

  1. Open the water supply fully

    Turn both hot and cold valves all the way on, and hold off on showers or other taps while the washer fills.

  2. Check the inlet hoses

    Straighten any kinked or pinched fill hoses behind the washer.

  3. Clean the inlet screens

    Turn off the water and unplug the washer. With a bucket ready, take the hoses off and rinse the screens at the washer's inlet, then reconnect snugly and turn the water back on.

  4. Check the drain hose

    A drain hose pushed too far into the standpipe, or sealed into it, can siphon water out during the fill. It shouldn't be kinked and should sit loosely in the drain.

When to call a technician

Water supply and hoses fine and E11 still returning: the inlet valve or water level sensor probably needs testing by a technician.

Parts linked to E11

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Electrolux models show the E11 code?

Some Electrolux front-load washers show E11, according to AppliancePartsPros. Electrolux's own E10-family guidance covers its washing machines and washer dryers.

Can I fix Electrolux E11 myself?

Usually, yes. Most E11 problems clear with simple checks you can do at home. Start with the first step above: open the water supply fully.

Other Electrolux washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked