Guides Search

Home › Electrolux › Washers › E40

Electrolux Washer E40 Error Code

Door lock problem on Electrolux washers.

ElectroluxAll Electrolux washer codes

E40
Moderate DIY

Electrolux uses E40 and similar codes for a door lock problem. Its support page doesn't go further than that, so the checks below only rule out simple causes like a door that isn't fully shut.

Compatible models

No model list is published. It's a door lock code, so it shows on front-loading Electrolux washing machines and washer dryers.

Also shown as

Listed as E40 or similar codes; the specific code in the family depends on the model.

Difficulty

Start with the safe checks below; a worn part may need replacing.

Not sure you are reading the code right? See how to read Electrolux washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Electrolux E40

  1. Close the door firmly

    Open the door, make sure no clothing is caught in the rubber seal, and close it again until it clicks.

  2. Check the latch

    Look at the door hook and latch for damage or detergent residue and wipe them clean with the washer unplugged.

  3. Reset it

    Write the code down first, then unplug for 5 minutes and try a short program.

When to call a technician

Door properly shut and the code back again: book a technician to check the door lock. Never try to bypass it.

Parts linked to E40

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Step-by-step guides for this problem

Frequently asked questions

Which Electrolux models show the E40 code?

No model list is published. It's a door lock code, so it shows on front-loading Electrolux washing machines and washer dryers.

Can I fix Electrolux E40 myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear E40, the cause is likely a worn part that needs replacing.

Other Electrolux washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked