Home › Washers › Bosch › E32 / F32
Bosch Washer E32 / F32 Error Code
Load is off-balance. Here is what it means and how to clear it, easiest fix first.
The washer sensed that the laundry was bunched to one side and slowed or skipped the final spin to protect itself. Bosch does not treat this as a machine fault. It happens most often with a single heavy item, like a bath mat, or with bedding that has balled up.
On Bosch UK models the display may flash "End" when a program finishes after an off-balance spin. Bosch's US list uses E32/F32, and E:60 with -2B or H:32 on other models, for the same uneven-load warning.
How to fix Bosch E32 / F32
Spread the load out
Open the door and untangle the laundry so it is spread evenly around the drum. Mix large and small items rather than washing one heavy piece on its own.
Close up bedding
Close zippers and buttons on duvet covers and pillowcases so smaller items cannot get trapped inside them.
Run a spin
Run a Spin program to remove the extra water from the clothes.
When to call a technician
If even small, mixed loads show this code, have a technician check the shock absorbers, suspension and the drive.
Parts that commonly cause E32 / F32
- Shock absorbers
- Suspension springs
Order parts by your exact model number so they fit.
Other Bosch washer codes
- E18 / F18Washer is not draining
- E17 / F17Water is not coming in fast enough
- E16 / F16Door is open or not locked
- E23 / F23Leak detected or AquaStop triggered
- E33 / F33Too much suds
- E:30Water level problem (read the number after the code)
- E:36Drain pump blocked
- E:10i-DOS dosing pump blocked
- H9EHot water supply problem
- E19 / F19Water is taking too long to heat
- E20 / F20Unexpected heating
- E25 / F25Turbidity (water clarity) sensor fault
- E26 / F26 / F27Water level (pressure) sensor fault
- E28 / F28Flow sensor fault
- E56Internal communication error
- E80Motor drive circuit fault
- CLChild lock is on
Frequently asked questions
What does E32 / F32 mean on a Bosch washer?
The washer sensed that the laundry was bunched to one side and slowed or skipped the final spin to protect itself. Bosch does not treat this as a machine fault. It happens most often with a single heavy item, like a bath mat, or with bedding that has balled up.
Can I fix Bosch E32 / F32 myself?
Usually, yes. Most E32 / F32 problems clear with simple checks you can do at home. Start with the first step above: spread the load out.
What if E32 / F32 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when E32 / F32 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.