Amana Washer Err Error Code
Change not allowed right now on Amana washers.
Err pops up when you try to change the cycle or its options mid-cycle, or press Start with the door open. The washer is refusing the action.
Compatible models
Amana front-load washers. Amana's article doesn't name model numbers.
Also shown as
No other codes are listed for this fault.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read Amana washer codes.
How to fix Amana Err
Close the door
Shut the door until it latches, then press Start.
Change settings before starting
If you want a different cycle, cancel the current one first, pick the new cycle, then start it.
Reset if it sticks
If Err won't leave the display, do the 5-minute unplug reset.
When to call a technician
Err showing when nobody touched the controls, or with the door shut: contact Amana service.
Step-by-step guides for this problem
Frequently asked questions
Which Amana models show the Err code?
Amana front-load washers. Amana's article doesn't name model numbers.
Can I fix Amana Err myself?
Usually, yes. Most Err problems clear with simple checks you can do at home. Start with the first step above: close the door.
Other Amana washer codes
- F9 E1Washer is taking too long to drain
- F8 E1Not enough water coming in
- F20No water or too little water
- F21Drain problem
- F5 E1Door switch problem
- F5 E2Door won't lock
- F7 E1Motor can't reach cycle speed
- F8 E2Dispenser system problem
- F8 E3Too much water or foam
- F0 E2Too many suds in the drum
- F0 E1Clothes in the drum during Clean Washer
- IntCycle was paused or canceled
- LoCControl Lock is on
- FdSettings returned to factory defaults
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.