Home › Bosch › Dishwashers › E22
Bosch Dishwasher E22 Error Code
Filter is blocked. What it means, which models show it, and how to clear it, easiest fix first.
BoschAll Bosch dishwasher codes
Food debris has built up in the filter at the bottom of the tub, so water can't circulate properly. It often appears when the filter hasn't been cleaned for a while or dishes go in with a lot of food still on them.
Compatible models
Bosch doesn't publish a model list for this code; it appears on Bosch dishwashers with a digital display. Check your owner's manual.
Also shown as
Newer US models show E9240 for the same fault. Some European guides list a related E92 code for dirty or clogged filters.
Difficulty
Most people can clear this one at home with simple checks.
How to fix Bosch E22
Remove the filter
Switch off the dishwasher, take out the bottom rack, and twist the filter out of the floor of the tub. Your manual shows the exact steps for your model.
Clean it well
Rinse the filter under running water and scrub gently with a soft brush and a little mild dish soap to clear trapped grease and debris. Rinse again.
Refit it so it locks
Put the filter back and turn it until it locks in place. A filter that isn't locked can cause poor cleaning and more errors.
Clean it regularly
Check and rinse the filter every few weeks, more often if you don't scrape plates first. Run a short cycle to confirm the code has cleared.
When to call a technician
If the filter is clean and locked in but E22 keeps appearing, have a technician check the wash pump and circulation system.
Parts linked to E22
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
- Filter assembly
Order parts by your full model number so they fit.
Frequently asked questions
What does E22 mean on a Bosch dishwasher?
Food debris has built up in the filter at the bottom of the tub, so water can't circulate properly. It often appears when the filter hasn't been cleaned for a while or dishes go in with a lot of food still on them.
Which Bosch models show the E22 code?
Bosch doesn't publish a model list for this code; it appears on Bosch dishwashers with a digital display. Check your owner's manual.
Can I fix Bosch E22 myself?
Usually, yes. Most E22 problems clear with simple checks you can do at home. Start with the first step above: remove the filter.
What if E22 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when E22 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Other Bosch dishwasher codes
- E15Water detected in the base (leak protection)
- E24Dishwasher is not draining (blocked drain path)
- E25Drain pump blocked or pump cover loose
- E23Drain pump fault
- E16 / E17Water can't enter the dishwasher
- E18Water level too low
- E14Flow meter or filling problem
- E09Heating fault (meaning varies by region)
- E27Household power supply too low
- E12Limescale buildup in the heat pump
- E21Heat pump blocked
- E01-E05Control board or electronics fault
- E06Door sensor circuit fault
- E19Detergent dispenser fault
- E07 / E10CrystalDry (zeolite) drying fault
- H01Delay start is set (not an error)
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.