Search

Home › Bosch › Dishwashers › E06

Bosch Dishwasher E06 Error Code

Door sensor circuit fault. What it means, which models show it, and how to clear it, easiest fix first.

BoschAll Bosch dishwasher codes

E06
May need a pro

The control is getting a bad signal from the door sensor circuit, so it can't confirm the door is closed properly.

Compatible models

Bosch doesn't publish a model list for this code; it appears on Bosch dishwashers with a digital display. Check your owner's manual.

Also shown as

Newer US models show E8000 for the same fault.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Bosch E06

  1. Close the door firmly

    Make sure nothing in the racks is sticking out and blocking the door, then close it until the latch clicks.

  2. Reset the dishwasher at the breaker

    Switch off the dishwasher's circuit breaker, wait about 30 seconds, then switch it back on. Run a short cycle with the dishwasher empty and watch whether the same code comes back. A code that clears and stays away was likely a one-time glitch.

When to call a technician

If E06 returns, call Bosch support or a technician to check the door latch and sensor. Never bypass or tape over a door switch.

Parts linked to E06

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does E06 mean on a Bosch dishwasher?

The control is getting a bad signal from the door sensor circuit, so it can't confirm the door is closed properly.

Which Bosch models show the E06 code?

Bosch doesn't publish a model list for this code; it appears on Bosch dishwashers with a digital display. Check your owner's manual.

Can I fix Bosch E06 myself?

Only the basic checks. You can safely try the steps above, but E06 usually points to a part or fault that needs a technician.

What if E06 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when E06 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Bosch dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked