Maytag Dryer F2 E1 Error Code

A control panel button is stuck on Maytag dryers.

F2 E1

Moderate DIY

One of the keys on the panel is reading as pressed all the time. Sticky spills, a key pushed in too hard, or a worn keypad are the common reasons.

Compatible models

Maytag Centennial dryers (F2 E1) and Maytag Bravos dryers (F-02), per Sears PartsDirect.

Also shown as

Sears PartsDirect lists F2 E1 as a stuck button on Centennial dryers. Older Bravos dryers show F-02 for a user interface keypad failure, which Sears says is usually a stuck button.

Difficulty

Start with the safe checks below; a worn part may need replacing.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Maytag dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Maytag F2 E1

Work each key
Press and let go of every button, one at a time. A stuck one usually feels flat or mushy and doesn't click back up.
Wipe the panel
With the dryer unplugged, clean around the button edges with a cloth that's only slightly damp. Spraying liquid onto the panel can let it seep behind the keys.
Reset and test
Turn the breaker(s) off for a minute, turn them back on and start a Timed Dry cycle. Watch the display for a minute; if F2 E1 stays away, the key has probably freed up.

When to call a technician

When a key can't be freed, Sears PartsDirect says to replace the user interface control. That part sits inside the console, so book a technician.

Parts linked to F2 E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

User interface and keypad

Order parts by your full model number so they fit.

Step-by-step guides for this problem

DryerTroubleshootingDryer Won't Start? Door, Breaker, Fuse and Switch Checks
Most dryers that won't start have a door that isn't fully latched, a start button that wasn't held for 2 to 5 seconds, a control lock that's on, or a tripped breaker.
5 min readRead guide

Frequently asked questions

Which Maytag models show the F2 E1 code?

Maytag Centennial dryers (F2 E1) and Maytag Bravos dryers (F-02), per Sears PartsDirect.

Can I fix Maytag F2 E1 myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear F2 E1, the cause is likely a worn part that needs replacing.

Other Maytag dryer codes

Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.

Sources we checked