Maytag Dryer F3 E1 Error Code

Exhaust thermistor failure on Maytag dryers.

F3 E1

May need a pro

The exhaust thermistor reads the temperature of the air leaving the drum, and the control uses it to cycle the heat. F3 E1 means that reading is out of range, usually from a failed sensor or a damaged or loose wire to it.

Compatible models

Maytag Centennial (F3 E1) and Maytag Bravos (F-22, F-23) dryers, per Sears PartsDirect.

Also shown as

Maytag Bravos dryers show F-22 or F-23 for the same exhaust thermistor failure. Sears PartsDirect gives the sensor's room-temperature value as about 10,000 ohms, a check for a technician.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Maytag dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Maytag F3 E1

Reset the dryer
Breaker(s) off for one minute, then back on. Start a heated Timed Dry and see whether the code reappears in the first couple of minutes.
Clean the lint path anyway
Unplug the dryer, clean the lint screen and look down the screen slot with a flashlight for packed lint. A clean lint path lowers the fire risk while you wait for service.

When to call a technician

A returning F3 E1 means the thermistor and its harness need testing inside the cabinet, so call a technician. On a gas model, never open the burner area; any gas odor means leave the house and call the gas company.

Parts linked to F3 E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Step-by-step guides for this problem

DryerTroubleshootingDryer Not Heating? Electric and Gas Causes and Safe Fixes
Start with the free checks: a no-heat cycle such as Air Fluff, a tripped half of the 240-volt breaker on electric dryers, or a closed gas valve on gas models.
5 min readRead guide

Frequently asked questions

Which Maytag models show the F3 E1 code?

Maytag Centennial (F3 E1) and Maytag Bravos (F-22, F-23) dryers, per Sears PartsDirect.

Can I fix Maytag F3 E1 myself?

Only the basic checks. You can safely try the steps above, but F3 E1 usually points to a part or fault that needs a technician.

Other Maytag dryer codes

Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.

Sources we checked