Home › Dishwashers › GE › Start/Reset light blinking
GE Dishwasher Start/Reset light blinking Error Code
Cycle reset or interrupted. Here is what it means and how to clear it, easiest fix first.
A blinking Start or Start/Reset light means the cycle was reset or interrupted (for example by a power cut) and the dishwasher is draining and shutting down. It is normal for it to blink for about 75 to 90 seconds.
Other blinking lights or beeps vary by model; GE suggests power surges as a common cause. Beeping every 30 to 60 seconds usually means the door was opened mid-cycle.
How to fix GE Start/Reset light blinking
Wait it out
Let the light blink for up to 90 seconds while the dishwasher drains. If you pressed Start/Reset, choose your cycle again and press Start once. After a power cut, some models resume the cycle on their own.
Clear a surge glitch
If other lights are blinking or it keeps beeping, press Start/Reset and wait 2 minutes. If that doesn't help, switch off the breaker for 30 seconds, then restore power.
When to call a technician
If lights keep blinking after a breaker reset, schedule service and note your model number so the technician can read its codes.
Other GE dishwasher codes
- C1 / C2Draining is taking too long
- C3 / FTD / F56Dishwasher won't drain
- C4Overfill float stuck or sump clogged
- C5Drain time too short (underfill)
- C6Incoming water too cold
- C7Temperature sensor circuit fault
- C8Detergent cup blocked
- Cup OpenDetergent cup not closed
- H2OLow water
- PrSPressure sensor signal fault
- LEAK DETECTEDLeak sensor found water
- 999Control needs a reset (or leak on some models)
- PFPower failure
Frequently asked questions
What does Start/Reset light blinking mean on a GE dishwasher?
A blinking Start or Start/Reset light means the cycle was reset or interrupted (for example by a power cut) and the dishwasher is draining and shutting down. It is normal for it to blink for about 75 to 90 seconds.
Can I fix GE Start/Reset light blinking myself?
Usually, yes. Most Start/Reset light blinking problems clear with simple checks you can do at home. Start with the first step above: wait it out.
What if Start/Reset light blinking keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when Start/Reset light blinking appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.