Home › Refrigerators › Samsung › 76C
Samsung Refrigerator 76C Error Code
Water detected in the AutoFill pitcher area. Here is what it means and how to clear it, easiest fix first.
On models with an AutoFill water pitcher, 76C or a blinking AutoFill light means the fridge has detected water in the compartment that holds the pitcher. Spilled or leaked water from the pitcher is a likely source, for example if it is cracked or not seated properly.
May show as a blinking AutoFill indicator instead of a number.
How to fix Samsung 76C
Remove and inspect the pitcher
Take out the AutoFill pitcher and look for cracks, a loose lid or a poorly seated base.
Dry the compartment
Wipe the compartment and the sensor area completely dry with a soft cloth, then put the pitcher back so it sits flat and fully in place.
When to call a technician
If water keeps collecting in the compartment after you dry it and reseat the pitcher, request service; the pitcher fill system may be leaking.
Parts that commonly cause 76C
- AutoFill pitcher
- Water inlet valve
Order parts by your exact model number so they fit.
Other Samsung refrigerator codes
- OF OFFridge is in demo (Cooling Off) mode
- 21EFreezer fan is not turning
- 22EFresh food fan error
- 40EIce room fan error
- 39EIce maker function error
- 8EIce maker sensor error
- 33EIce pipe heater error
- 5EFridge defrost sensor error
- 1EFreezer temperature sensor fault
- 88 88Display did not boot correctly after a power cut
- 83ECompressor power problem (surge or brownout)
- 84CCompressor lock
- 85CLow voltage notice (Family Hub)
- PC ERCommunication error between fridge parts
- 41Family Hub screen or software error
- Ice OffIce Off light blinking
- Blinking displayTemperature display is blinking
- APWi-Fi setup mode
Frequently asked questions
What does 76C mean on a Samsung refrigerator?
On models with an AutoFill water pitcher, 76C or a blinking AutoFill light means the fridge has detected water in the compartment that holds the pitcher. Spilled or leaked water from the pitcher is a likely source, for example if it is cracked or not seated properly.
Can I fix Samsung 76C myself?
Usually, yes. Most 76C problems clear with simple checks you can do at home. Start with the first step above: remove and inspect the pitcher.
What if 76C keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when 76C appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.