Electrolux Dryer E51 / E53 Error Code

Drive motor failure on Electrolux dryers.

E51 / E53

May need a pro

E51 is a drive motor failure and E53 an internal error in the circuit that monitors the motor. Sears PartsDirect checks the harness between the main board and motor for E51, and goes straight to the main board for E53.

Compatible models

Sears PartsDirect names the Electrolux compact condensing dryer; other models aren't listed.

Also shown as

Sears PartsDirect lists them as Ex51 and EX53 for the Electrolux compact condensing dryer.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Electrolux dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Electrolux E51 / E53

Reset the dryer
Unplug it for 5 minutes, plug it back in and try a short program with a light load.
Stop at strange noises
If the motor hums without turning the drum, or you smell burning, unplug the dryer and leave it off.

When to call a technician

Both codes need a technician to test the motor wiring, the main board and the motor.

Parts linked to E51 / E53

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Electrolux models show the E51 / E53 code?

Sears PartsDirect names the Electrolux compact condensing dryer; other models aren't listed.

Can I fix Electrolux E51 / E53 myself?

Only the basic checks. You can safely try the steps above, but E51 / E53 usually points to a part or fault that needs a technician.

Other Electrolux dryer codes

Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.

Sources we checked

www.searspartsdirect.com