Electrolux Dryer E31 / E32 Error Code

Humidity sensor failure on Electrolux dryers.

E31 / E32

May need a pro

The sensor that judges how dry the clothes are has stopped giving a usable signal. Sears PartsDirect checks the harness between the sensor and the main board first, then the sensor, then the board.

Compatible models

Electrolux compact condensing dryer (Sears PartsDirect code table).

Also shown as

Sears PartsDirect lists them as Ex31 and Ex32 for the Electrolux compact condensing dryer.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Electrolux dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Electrolux E31 / E32

Restart the dryer
Turn it off, unplug it for a few minutes, then plug in and start a sensor cycle with a normal-sized load.
Use a timed program meanwhile
If the code keeps stopping sensor cycles, a timed program may still work while you wait for a repair. Check loads early so nothing overdries.

When to call a technician

A returning code needs a technician to test the sensor harness and the sensor inside the dryer.

Parts linked to E31 / E32

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Electrolux models show the E31 / E32 code?

Electrolux compact condensing dryer (Sears PartsDirect code table).

Can I fix Electrolux E31 / E32 myself?

Only the basic checks. You can safely try the steps above, but E31 / E32 usually points to a part or fault that needs a technician.

Other Electrolux dryer codes

Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.

Sources we checked

www.searspartsdirect.com