Home › Miele › Dishwashers › Drain indicator flashing

Miele Dishwasher Drain indicator flashing Error Code

Drain light flashing, program stopped on Miele dishwashers.

Drain indicator flashing

Moderate DIY

On models with indicator lights instead of a code display, a flashing Drain light means water stayed in the cabinet after a drain. A dirty filter, something stuck in the drain pump, or a kinked or clogged drain hose is behind it.

Compatible models

This is the light-only version, found on Miele models that have a Drain indicator instead of a code display.

Also shown as

It's the indicator-light counterpart of a drain fault. Display models report drain problems with a code such as F11.

Difficulty

Start with the safe checks below; a worn part may need replacing.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Miele dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Miele Drain indicator flashing

Clean the filter combination
Switch the dishwasher off, turn the filter handle back and lift it out. Rinse off food and brush away grease, open the flap inside to rinse the fine mesh, then refit it flat and turn the handle forward until the arrows line up.
Check the pump under the non-return valve
Unplug the machine first. Bail out the water, unclip the non-return valve and rinse it, then look in the pump for a pit or glass shard. The impeller should turn by hand with slight resistance.
Check the drain hose
With the machine still unplugged, follow the drain hose from the back of the cabinet to the sink connection. Straighten any loops or kinks and clear buildup at the sink end. Pull the dishwasher out only if you can do it without straining the hoses.

When to call a technician

If the light keeps flashing after the filter, pump and hose are clean, book Miele Service.

Parts linked to Drain indicator flashing

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

filter assembly
drain pump
drain hose

Order parts by your full model number so they fit.

Step-by-step guides for this problem

DishwasherDishwasher Not Draining? 7 Fixes to Try Before Calling a Pro
A clogged filter, a garbage disposer that needs clearing (or a new one with its knockout plug still in), a blocked air gap or a kinked drain hose cause most drain problems.

Frequently asked questions

Which Miele models show the Drain indicator flashing code?

This is the light-only version, found on Miele models that have a Drain indicator instead of a code display.

Can I fix Miele Drain indicator flashing myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear Drain indicator flashing, the cause is likely a worn part that needs replacing.

Other Miele dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked