Haier Washer E2 Error Code
Lid reads as open on Haier washers.
The lid switch reports the lid as open. Usually the lid isn't fully down, or a piece of clothing is propping it up.
Compatible models
US Haier portable washers with a lid switch. Haier doesn't say which models use which of the three codes.
Also shown as
Depending on the model, the same lid fault shows as dO, E0 or E2.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read Haier washer codes.
How to fix Haier E2
Close the lid properly
Push any clothing down into the tub and lower the lid all the way. Check nothing is sitting on the lid edge.
Restart the cycle
Press Start again once the lid is down flat.
When to call a technician
If the lid is fully closed and the code won't clear, call Haier service. The lid switch may need replacing; don't tape or jumper it.
Parts linked to E2
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
- lid switch
Order parts by your full model number so they fit.
Frequently asked questions
Which Haier models show the E2 code?
US Haier portable washers with a lid switch. Haier doesn't say which models use which of the three codes.
Can I fix Haier E2 myself?
Usually, yes. Most E2 problems clear with simple checks you can do at home. Start with the first step above: close the lid properly.
Other Haier washer codes
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.