Guides Search

Home › Kenmore › Refrigerators › d2

Kenmore Refrigerator d2 Error Code

Forced defrost is running on Kenmore refrigerators.

KenmoreAll Kenmore refrigerator codes

d2
Easy DIY fix

d2 isn't a fault. It shows while the refrigerator is in forced defrost mode, and the control ends that mode by itself once an evaporator coil warms to 55°F (13°C), then goes back to normal cooling.

Compatible models

Kenmore Trio bottom-freezer models with a 111 prefix.

Also shown as

Not related to the d code on 106-prefix models, which means a stuck air damper.

Difficulty

Most people can clear this one at home with simple checks.

Not sure you are reading the code right? See how to read Kenmore refrigerator codes.

Safety first: unplug the refrigerator (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Kenmore d2

  1. Let it finish

    Keep the doors shut and leave the fridge alone. No repair is needed for d2.

  2. Check back in a few hours

    Look at the codes again later. Once defrost is over, d2 should be gone and the compartments cooling as usual.

When to call a technician

Book a service visit only if the fridge never leaves defrost and starts warming up, or other codes show up alongside d2.

Frequently asked questions

Which Kenmore models show the d2 code?

Kenmore Trio bottom-freezer models with a 111 prefix.

Can I fix Kenmore d2 myself?

Usually, yes. Most d2 problems clear with simple checks you can do at home. Start with the first step above: let it finish.

Other Kenmore refrigerator codes

Last reviewed 2026-10-21. Codes and steps can vary by model; check your owner's manual.

Sources we checked